Removing and Installing Servo Motor For Emergency Release

Removing And Installing Servo Motor For Emergency Release

Technical values







Preliminary work

Preliminary work on servo motor for emergency release

Refer to Removing and installing front apron.

Removing servo motor for emergency release







1. Switch off ignition and remove ignition key.
2. Release electric connector -A- and unplug it at the servo motor.







3. Unscrew both fastening screws -1-.







4. Turn the servo motor and disengage the retaining pin from the cable at the servo motor.







5. Remove servo motor.

Installing servo motor for emergency release

1. Engage the cable retaining pin at the servo motor and clip it in.







2. Position servo motor and secure with the fastening screws. Tightening torque: 9.7 Nm (7.2 ftlb.)







3. Push electric plug onto the servo motor until it is felt to engage.







Subsequent work

Subsequent work on servo motor for emergency release

Refer to Removing and installing front apron.