Removing and Installing Cable For Locking Hook

Removing And Installing Cable For Locking Hook

Technical values







Preliminary work

1. Remove trim panel for hood compartment. Refer to Removing and installing trim panel for hood compartment.

Removing cable for locking hook

Disengaging cable for locking hook







1. Loosen cable for locking hook -1- on the hexagon nut -2- and swivel the nipple from the driving mechanism -3- upwards and pull out.







Removing cable for locking hook







1. Unscrew expansion rivets -1- and take off trim -2-.







2. Disengage cable for locking hook -1- from the cable holder -2-.







3. Unscrew fastening screws -3- and take off cable for locking hook -1- with support.

Installing cable for locking hook







1. Position cable for locking hook -1- with support on the body and screw down the fastening screws -3-. Tightening torque: 7.5 ftlb.







2. Engage cable for locking hook -1- to the cable holder -2-.
3. Position trim -2- and secure with the expansion rivets -1-.







Engaging cable for locking hook







1. Insert nipple in the driving mechanism -3-, adjust cable for locking hook -1- using the hexagon nut -2- so that it is without play.







Subsequent work

Install trim panel for convertible top rest. Refer to Removing and installing trim panel for convertible top rest.