94711900 Removing and installing auxiliary headlight

WM 947119 Removing and installing auxiliary headlight

Removing auxiliary headlight





Installation location

1. Unscrew both fastening screws -1-.





Unscrewing fastening screws

2. Pull down headlight at the side -A- and remove it from front apron.





Pulling out headlight

3. Release electric connectors -1, 2- -A- and remove from auxiliary headlight.





Unplugging electric connectors

Installing auxiliary headlight

NOTICE

Auxiliary headlight is inserted into the front apron at a tilt

- Risk of damage to paintwork on front spoiler

-> Carefully insert auxiliary headlight into the guides on the front apron.
-> Make sure that the guide on the housing is inserted into the guide on the front apron.

1. Make sure that the ventilation connection piece is correctly seated on the auxiliary headlamp.
2. Connect the electric connectors -1, 2- until they are felt to engage.





Pushing on electric connectors

3. Push auxiliary headlight into front apron, ensuring that the locking tab -A- is engaged in the front apron.





Engaging locking tab in front apron

4. Push auxiliary headlight on locking tab side -A- upwards and secure using both fastening screws -1-.





Screwing down auxiliary headlight

Subsequent work

Subsequent work for auxiliary headlight

Information

On installing a new auxiliary headlight, the adjustment must be checked with a headlight adjustment unit and adjusted if necessary.

Adjust the auxiliary headlight using a size 30 Torx socket wrench.





Adjusting auxiliary headlight