System Specifications

Displacement 3,598 cm3 (219.5 in3)
Bore 89 mm (3.50 in)
Stroke 96.4 mm (3.80 in)
Compression 12.5 (-0.5)
Crankcase Cast iron, single-part
Crankshaft Forged, supported by 7 bearings
Crankshaft bearing Binary bearings, dia. 60 mm (2.36 in)
Connecting rod Forged, I = 164 mm (6.46 in.)
Connecting-rod bearing Binary bearings, dia. 54 mm (2.13 in)

Crankshaft bearing cap to crankcase M10 x 78
Initial tightening 30 Nm (22 ftlb.) +/-3 Nm (+/-2.0 ftlb.)
Torque angle 180° +/-10°

Connecting rod cap to connecting rod M9 x 1 x 50
Initial tightening 30 Nm (22 ftlb.) +/-3 Nm (+/-2.0 ftlb.)
Torque angle 90° +/-10°

Vibration damper to crankshaft M18 x 1.5 x 40
Initial tightening 100 Nm (74 ftlb.) +/-10 Nm (+/-7.5 ftlb.)
Torque angle 180° +/-10°