Removing And Installing Front Wire Harness

Removing And Installing Front Wire Harness

Preliminary work
1. Remove front apron.
2. Remove front direction indicator.

Removing front wire harness







1. Unclip plug connections on the front apron at the right.
1.1. Unclip plug connections -1 and 2- on the front apron -arrows A-.







1.2. Unclip front wire harness -4- at the line bracket -3- (-arrow B-).







2. Release connector -1- (-arrow A-) and pull it off the fog light -2- at the left and right -arrow B-.







3. Take front wire harness -1- out of the air grille holders at the left and right -arrows-.







4. Unclip front wire harness -1- from the radiator grille holders -arrows-
5. Pull off connector on sensor for ParkAssist.
5.1. Release clips -arrows A- and remove sensor for ParkAssist -1- (-arrow B-).







5.2. Release connector -2- (-arrow C-) and pull it off sensor for ParkAssist -1- (-arrow D-).
6. Remove front wire harness.

Installing front wire harness
1. Plug in connector on sensor for ParkAssist.
1.1. Plug in connector -2- on sensor for ParkAssist -1- (-arrow A-) until the connector -2- engages securely.







1.2. Press sensor for ParkAssist -1- into the mounting -arrow B- until the clips engage securely.







2. Clip front wire harness -1- in at the holders -arrows-.







3. Insert front wire harness -1- into the air grille holders at the left and right -arrows-.







4. Push connector -1- onto the fog light -2- at the left and right -arrow- until the connector engages securely.
5. Clip front wire harness into the front apron at the right.
5.1. Clip front wire harness -4- and line bracket -3- into the front apron -arrow A-.







5.2. Clip plug connections -1 and 2- into the front apron -arrows B-.

Subsequent work
1. Install front direction indicator.
2. Install front apron.