Security Lamp/Indicator: Service and Repair

WM 968919 Removing and installing light-emitting diode for alarm system

Preliminary work

Remove door trim panel. -> 705919 Removing and installing front door trim - section on "removing" 705919 Removing and Installing Front Door Trim Panel

Removing light-emitting diode for alarm system





Overview of light-emitting diode for alarm system

1. Release light-emitting diode -Arrows A- and pull it down and off -Arrow B-.





Removing light-emitting diode

2. Release -Arrow A- and pull off -Arrow B- plug.





Unplugging light-emitting diode

Installing light-emitting diode for alarm system

1. Plug in the light-emitting diode connector -Arrow A- until the locking tab -Arrow B- is felt to engage.





Inserting light-emitting diode

2. Press light-emitting diode into the housing -Arrow A- until the locking tabs are felt to engage -Arrows B-.





Installing light-emitting diode

Subsequent work

Install door trim panel. -> 705919 Removing and installing front door trim - section on "installing" 705919 Removing and Installing Front Door Trim Panel