915119 Removing and Installing Display For Park Assist

WM 915119 Removing and installing display for ParkAssist

Removing display for ParkAssist

Removing front display

Information

The warning display for the front area is located on the dashboard. The different monitoring areas (left and right) are each divided into 1 green, 4 yellow and 2 red LED segments.

1. Switch off ignition and remove ignition key.
2. Lift cover on dashboard using plastic spatula -Arrow 2- and unclip -Arrows 1-.





Unclipping cover

3. Disconnect plug connection for sun sensor and display field.





Disconnecting electrical plug connections

4. Lift the three cover retaining clips and remove display field.





Lifting retaining clips and removing display field

Removing rear display

Information

The warning display for the front area is located on the dashboard. The different monitoring areas (left and right) are each divided into 1 green, 4 yellow and 2 red LED segments.

1. Switch off ignition and remove ignition key.
2. Carefully lift and unclip display field from headliner using a plastic spatula.





Unclipping display field

3. Disconnect electrical plug connection for display field.





Disconnecting electrical plug connection

Installing display for ParkAssist

Installing front display

1. Insert display field into holder and fasten with the three retaining clips.





Fastening display field

2. Connect plug connections for sun sensor and display field so that plugs are felt to engage.





Connecting electrical plug connections

3. Position cover and clip into dashboard.

Installing rear display

1. Connect electrical plug connection for display field so that plug is felt to engage.





Connecting electrical plug connection

2. Position display on headliner and clip in.





Positioning display on headliner and clipping in