Power Trunk / Liftgate Hazard Tone Speaker: Service and Repair

WM 558019 Removing and installing rear lid buzzer

Preliminary work

Remove trim panel for rear lid. -> 708719 Removing and installing trim panel for rear lid - section on "Removing" 708719 Removing and Installing Lining For Rear Lid

Removing rear lid buzzer





Installation position of rear lid buzzer

1. Unscrew fastening screws -1- and remove rear lid buzzer -2- from the rear lid trim panel.





Removing rear lid buzzer

2. Release connector -arrows A- and pull it off the rear lid buzzer -arrow B-.





Pulling off connector on rear lid buzzer

Installing rear lid buzzer

1. Plug in connector on rear lid buzzer -arrow- until the connector engages securely.





Plugging in connector on rear lid buzzer

2. Position rear lid buzzer -2- on the rear lid trim panel and secure with the fastening screws -1-.





Securing rear lid buzzer

Subsequent work

Install trim panel for rear lid. -> 708719 Removing and installing trim panel for rear lid - section on "Installing" 708719 Removing and Installing Lining For Rear Lid