709119 Removing and Installing Lid Hinge Trim

WM 709119 Removing and installing lid hinge trim

Removing lid hinge trim





1. Remove hinge cover.
1.1. Insert a plastic wedge between the body and hinge cover -1-.
1.2. Carefully unclip and remove the hinge cover -1-.





2. Remove outer hinge cover.
2.1. Undo fastening screws -3-.
2.2. Remove outer hinge cover -2- -(Arrow B)-.





3. Remove inner hinge cover.
3.1. Unclip inner hinge cover -4- -Arrows C-.





3.2. Swivel out inner hinge cover -4- -Arrow D- and remove it.





4. Remove wiring duct on lid hinge.
4.1. Remove wiring duct -5- from lid hinge -Arrow E-.





4.2. Open wiring duct -5- -(Arrows F)- and remove the cover -6- -(Arrow G)-.





4.3. Remove wiring duct -6- from wire harness -(Arrow H)-.





5. Remove wiring duct on rear window hinge.
5.1. Release wiring duct -7- -(Arrow I)- and remove it from rear window hinge -(Arrow K)-.





5.2. Release cover -8- -(Arrows L)- and remove it -(Arrow M)-.









5.3. Remove wiring duct -7- from wire harness -(Arrow N)-.






Installing lid hinge trim









1. Install wiring duct on rear window hinge.
1.1. Guide wiring duct -7- over wire harness -(Arrow A)-.





1.2. Press in the cover -8- -(Arrow B)- until the locking tabs engage audibly -(Arrow C)-.









1.3. Place the wiring duct -7- on the rear window hinge until the locking tabs engage audibly ( -(Arrow D)- ).





2. Install wiring duct on lid hinge.
2.1. Guide wiring duct -5- over wire harness -(Arrow E)-.





2.2. Press in the cover -6- until the locking tabs engage audibly -(Arrow F)-.





2.3. Connect wiring duct -5- to the rear window hinge -(Arrow G)-.





3. Install hinge cover on inner lid.
3.1. Insert hinge cover -4- -(Arrow H)- and clip into place -(Arrows I)-.









4. Install hinge cover on outer lid.
4.1. Insert hinge cover on outer lid -2- -(Arrow K)-.
4.2. Screw in -3- fastening screws.





5. Install hinge cover on body.
5.1. Position the hinge cover -1- and clip it into place -(Arrow L)-.