668323 Installing Number Plate Cover (USA)

WM 668323 Installing number plate cover (USA)

Installing number plate cover

Installing front number plate cover





Installation position of front number plate cover

Information

- The following description only applies to states in the USA in which a license plate is required at the front of the vehicle.

1. Stick an adhesive strip that can be written on -1- approximately in the centre of the front apron.





Finding the centre of the front apron

2. Find the centre between the vertical shafts on the air grille and mark this spot on the adhesive strip -1- affixed to the front apron -arrow-.
3. Approximately in the centre of the front number plate cover -1- , affix an adhesive strip that can be written on -2-.





Finding the centre of the front number plate cover

4. Find the centre between the outer edges of the front number plate cover -1- and mark this spot on the adhesive strip -2- affixed to the front number plate cover -arrow-.
5. Position front number plate cover -2- on the contour of the front apron -arrow- and align it according to the markings on the adhesive tape.





Installing front number plate cover

6. Screw in self-tapping fastening screws -1-.
7. Remove adhesive strips -1- and -2- ( -arrows- ).





Removing adhesive strips