68173724 Removing and installing rear cover for centre console

WM 681737 Removing and installing rear cover for centre console

Technical values





Preliminary work

1. Remove rear centre air jet => 855719 Removing and installing rear centre air jet - section on "Removing".

Removing rear cover for centre console





Removing and installing rear cover for centre console

1. Open oddments tray -Arrow A-.





Opening oddments tray

2. Unclip cover for air-conditioning control panel -2- ( -Arrow B- ).





Unclipping cover for A/C control panel

3. Screw out screws at the top -3- and remove them -Arrow C-.





Screwing out screws at the top

4. Loosen clip connection -4- at the bottom -Arrow D-.





Loosening clip connection at the bottom

5. Remove cover -1- ( -Arrow E- ).





Removing cover

Installing rear cover for centre console





Removing and installing rear cover for centre console

1. Position cover -Arrow E-.





Positioning cover

2. Clip in cover at the bottom -Arrow D-.





Clipping in cover at the bottom

3. Insert and screw in screws at the top -3- ( -Arrow C- ) and tighten to the specified tightening torque. => Tightening torque: 1.4 Nm (1.0 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.)





Screwing in screws

4. Clip in cover for air-conditioning control panel -2- ( -Arrow B- ).





Clipping in cover for A/C control panel

5. Close oddments tray -Arrow A-.





Closing oddments tray

Subsequent work

1. Install rear centre air jet => 855719 Removing and installing rear centre air jet - section on "Installing".