74501901 Removing and Installing Cover For 1/3-Split Folding Rear Bench

WM 745019 Removing and installing cover for 1/3-split folding rear bench

Tools










1. Remove padding for rear bench. => 744919 Removing and installing padding for rear bench - section on "Removing"





Removing cover for 1/3-split folding rear seat

2. Disconnect plug connection (only for vehicles with seat heater).
2.1. Release plug connection -1- ( -Arrow A- ) and disconnect it ( -Arrows B- ).





3. Remove cover.
3.1. Cut open the cushion clips -2- in the order shown -a to c- at the designated areas -circle marks- using side cutters and remove the cover -3- from the padding -Arrow C-. The remaining pieces of the cushion clips -2- must be removed.










Installing cover for 1/3-split folding rear bench





1. Installing cover: Place cover -3- on the padding -Arrow A- and align with contour of padding.





2. Fasten cover to the padding -3- using cushion clip pliers -4- and new cushion clips -2- in the order shown -a to c-. Cushion clip pliers NR.130













Installing cover for 1/3-split folding rear seat

3. Connect plug connection (only for vehicles with seat heater).
3.1. Push together the plug connection -1- -Arrows B- until the locking tab audibly engages -Arrow C-.





4. Install padding for rear bench. => 744919 Removing and installing padding for rear bench - section on "Installing"