743119 Removing and Installing Heating Element For Rear Backrest

WM 743119 Removing and installing heating element for rear backrest

Preliminary work

Remove cover for rear backrest. -> 745319 Removing and installing cover for rear backrest - section on "Removing" 745319 Removing and installing cover for rear backrest

Removing heating element for rear backrest

Information

- The backrest side bolster heating elements -1- are connected by an electrical lead and can only be replaced together.





Allocation of heating elements

- The heating element is sewn into the cover in the area of the backrest surface -2- and can only be replaced together with the cover.

- Remove the heating elements with care, otherwise the padding will be damaged.

- If necessary, carefully warm the heating elements with a hot-air gun. The temperature must not exceed 50°C.





Overview of heating element for rear backrest

1. Carefully remove the heating element, starting from the top -arrows-.





Detaching heating element

2. Remove heating element through the openings in the padding -arrows-.





Removing heating element

Installing heating element for rear backrest

1. Insert the heating elements through the padding.





Installing heating element

Information

- Stick on the heating elements individually.





Sticking on heating elements individually

2. Align heating element to contour of padding.
3. Remove protective film and, starting from the lower edge, stick heating element -Arrows A- onto the padding -Arrows B-.





Sticking on heating element

Subsequent work

Install cover for rear backrest. -> 745319 Removing and installing cover for rear backrest - section on "Installing" 745319 Removing and installing cover for rear backrest