Auxiliary Air Conditioning System

Removing And Installing Blower Regulator

Technical values







Preliminary work
Remove rear side trim panel.

Removing blower regulator

CAUTION:
Danger of damage and injury.
- Remove ignition key.
- First pull out the plug contacts on the switch before the fan control is removed.












1. Release both electrical connectors -Arrows A- and unplug them -Arrows B-.







2. Unscrew the two fastening screws -1- and remove the fan control -Arrow-.

Installing blower regulator







1. Insert the fan control einstecken -Arrow- and screw down with the fastening screws -1-. - Tightening torque: 1.0 ftlb.







2. Push in both connectors -Arrows A- until the locking tabs -Arrows B- are felt to engage.

Subsequent work
Install rear side trim panel.