Headlamp Motor: Service and Repair

Removing And Installing Servo Motor For Headlight Levelling System

Technical values







Preliminary work
1. Remove main headlight.

Removing servo motor for headlight levelling system
1. Remove cover.
1.1. Release cover -1- at the two clips -arrows A-.







1.2. Swivel the cover -1- out of the guides on the main headlight and remove it -arrows B-.







2. Unscrew fastening screws -1- on the servo motor for headlight levelling system -2-.







3. Take servo motor for headlight levelling system -1- and ball head out of the mounting -2- in a downward direction -arrow A- and remove servo motor for headlight levelling system -1- from the main headlight -arrow B-.







4. Release connector -1- ( -arrow A- ) and pull it off the servo motor for headlight levelling system -2- (-arrow B- ).

Installing servo motor for headlight levelling system







1. Plug in connector -1- on servo motor for headlight levelling system -2- ( -arrow- ) until the connector -1- engages securely.







2. Fit servo motor for headlight levelling system -1- into the main headlight -arrow A- and slide it into the mounting -2- from below -arrow B-.







3. Screw on servo motor for headlight levelling system -2- using the fastening screws -1-. - Tightening torque: 3 Nm (2.0 ftlb.).
4. Fit cover.
4.1. Fit cover -1- down into the guides on the main headlight and swivel it up -arrows A-.







4.2. Press cover -1- onto the main headlight until the two clips engage securely -arrows B-.

Subsequent work
1. Install main headlight.