664519 Removing and Installing Rear Wheel Cover
WM 664519 Removing and installing rear wheel coverTools
Tools and materials
Hot-air gun leister-electron
Erasing disc NR.174
Cleaning agent 000 043 157 00
Information
Installation notes for vehicles with mud flaps
Installation position of rear wheel arch cover
1. Install mud flaps. => 668119 Removing and installing mud flap - section on "Installing"
2. Clean bonding area
Cleaning bonding area
2.1. Wipe off installation area -A- with a cloth soaked in isopropanol.
3. Fit wheel cover on rear apron.
Fitting wheel cover on rear apron
3.1. Pull protective paper -1- off the adhesive tape -arrows-.
3.2. Align wheel cover -2- flush with the edge of the wheel cover on the rear side section -3- and align and fit mud flap -4- at this position -arrow-.
3.3. Press evenly and firmly with your hand on the area of the wheel cover where adhesive is applied -2-.