Fuel Tank Vent: Service and Repair

WM 202319 Removing and installing tank vent on 4.8-litre DFI engines

Preliminary work

1. Remove oil mist separator. -> 105519 Removing and installing oil mist separator on 4.8-litre DFI engines - section on "Removing" Service and Repair

Removing tank vent

1. Disconnect fuel tank ventilation line -2- at the plenum panel bulkhead.





Lines on plenum panel





Oil mist separator for positive crankcase ventilation, turbo engine









Oil mist separator for positive crankcase ventilation, naturally aspirated engine





2. Unclip rear fuel tank ventilation line at the wire harness. -arrow-





Fuel tank ventilation line

3. Disconnect plug connections at the front and feed out the line.

Installing tank vent

1. Feed tank vent with line in past the intake-air distributor.





Oil mist separator for positive crankcase ventilation, turbo engine









Oil mist separator for positive crankcase ventilation, naturally aspirated engine





2. Clip in rear fuel tank ventilation line at the wire harness. -arrow-





Fuel tank ventilation line

3. Insert tank ventilation line -2- at the plenum panel bulkhead.





Lines on plenum panel

Subsequent work

1. Install oil mist separator. -> 105519 Removing and installing oil mist separator on 4.8-litre DFI engines - section on "Installing" Service and Repair