558219 Removing and Installing Rear Lid Release Switch

WM 558219 Removing and installing rear lid release switch

Removing rear lid release switch





Installation position of rear lid release switch

1. Disengage rear lid release switch at the two clips using a plastic wedge -arrow A- and lift it up to remove it -arrow B-.





Unclipping lid-release switch

2. Release -arrow A- and pull off -arrow B- connector.





Pulling off connector

3. Release housing at the four clips using a small screwdriver -arrows A- and remove lid-release switch -1- from the housing -arrow B-.





Removing lid-release switch

Installing rear lid release switch

1. Slide lid-release switch -1- into the housing -arrow A- until the four clips engage securely -arrows B-.





Installing lid-release switch

2. Plug in connector on lid-release switch -arrow- until the connector engages securely.





Plugging in connector

3. Press lid-release switch into the door trim panel -arrow- until the lid-release switch engages securely.





Clipping in lid-release switch