Seat Temperature Switch: Service and Repair

WM 742419 Removing and installing switch for seat heating

Preliminary work

1. Remove PCM. -> 911019 Removing and installing display and operator control unit (PCM) - "Removing" section Service and Repair
2. Remove radio. -> 912419 Removing and installing car radio - "Removing" section 91241900 Removing and Installing Car Radio

Removing switch for seat heating





Overview of seat-heating switch

1. Reach into the opening for the radio unit or display and operator control unit, press the two securing clips -Arrows 1- together and remove the switch -Arrow 2- towards the front.





Removing switch

2. Press latch on connector and pull off.





Pulling off connector

Installing switch for seat heating

1. Press in the connector until it is felt to engage.





Plugging in connector

Information

- Ensure that the switch is fitted securely.

2. Push switch into the mounting -arrow- until the holders disengage.





Installing switch

Subsequent work

1. Install the PCM. -> 911019 Removing and installing display and operator control unit (PCM) - "Installing" section Service and Repair
2. Install radio. -> 912419 Removing and installing car radio - "Installing" section 91241900 Removing and Installing Car Radio