885419 Removing and installing temperature sensor

WM 885419 Removing and installing temperature sensor

Preliminary work

1. Remove rear roof trim panel. -> 708519 Removing and installing rear roof trim panel - section on "removing" 708519 Removing and Installing Rear Roof Lining
2. Remove D-pillar trim panel. -> 706919 Removing and installing D-pillar trim panel - section on "removing" 706919 Removing and Installing D-Pillar Trim
3. Remove C-pillar trim panel. -> 706819 Removing and installing C-pillar trim panel - section on "removing" 706819 Removing and Installing C-Pillar Trim Panel
4. Remove trim panel for left luggage compartment floor with tie-down ring. -> 700619 Removing and installing trim panel for luggage compartment floor (loadspace cover) - section on "removing" Service and Repair
5. Remove left rear backrest. -> 724719 Removing and installing rear backrest - section on "removing" 724719 Removing and Installing Rear Backrest
6. Remove rear side trim panel. -> 700319 Removing and installing side trim panel for rear luggage compartment - section on "removing" 700319 Removing and installing rear luggage compartment side-trim panel

Removing temperature sensor

Removing temperature sensor for left side





Overview of temperature sensor





1. Fold carpeted floor forwards.





Folding carpeted floor forwards

2. Turn the temperature sensor to the outside of the vehicle -arrow A- and remove it -arrow B-.





Removing left temperature sensor

3. Release the plug -arrows C- and pull off -arrow D-.

Removing temperature sensor for right side





Overview of temperature sensor





1. Turn the temperature sensor to the inside of the vehicle -arrow A- and remove it from the air duct -arrow B-.





Removing right temperature sensor

2. Release the plug -arrows C- and pull off -arrow D-.

Installing temperature sensor

Installing temperature sensor for left side

1. Check sealing ring for signs of damage -a- and replace if necessary.





Installing left temperature sensor

2. Insert the plug -arrow A- until the locking tabs -arrows B- are felt to engage.
3. Insert temperature sensor -arrow C- and turn it to the inside of the vehicle -arrow D- until the locking tabs -b- engage.
4. Fold back the carpeted floor -arrow- and align it.





Folding back the carpeted floor

Installing temperature sensor for right side

1. Check sealing ring -a- for signs of damage and replace if necessary.





Installing right temperature sensor

2. Insert the plug -arrow A- until the locking tabs -arrows B- are felt to engage.
3. Insert temperature sensor -arrow C- and turn it to the inside of the vehicle -arrow D- until the locking tabs -b- engage.

Subsequent work

1. Install rear side trim panel. -> 700319 Removing and installing side trim panel for rear luggage compartment - section on "installing" 700319 Removing and installing rear luggage compartment side-trim panel
2. Install left rear backrest. -> 724719 Removing and installing rear backrest - section on "installing" 724719 Removing and Installing Rear Backrest
3. Install trim panel for left luggage compartment floor with tie-down ring. -> 700619 Removing and installing trim panel for luggage compartment floor (loadspace cover) - section on "installing" Service and Repair
4. Install C-pillar trim panel -> 706819 Removing and installing C-pillar trim panel - section on "installing" 706819 Removing and Installing C-Pillar Trim Panel
5. Install D-pillar trim panel. -> 706919 Removing and installing D-pillar trim panel - section on "installing" 706919 Removing and Installing D-Pillar Trim
6. Install rear roof trim panel. -> 708519 Removing and installing rear roof trim panel - section on "installing" 708519 Removing and Installing Rear Roof Lining