976519 Removing and installing wire harness for anti-lock brake system (ABS)
WM 976519 Removing and installing wire harness for anti-lock brake system (ABS)
Preliminary work
1. Remove wheel. -> 440519 Removing and installing wheel - section on "Removing" Removal and Replacement
Removing wire harness for anti-lock brake system (ABS)
Removing front ABS wire harness
Installation position of front ABS wire harness
Overview of wire harness for ABS
1. Release the socket -arrow A- and pull it off -arrow B-.
Disconnecting plug connection for brake pad wear indicator
2. Take the line out of the bracket -arrow C-.
3. Release the connector -arrow A- and pull it off -arrow B-.
Pulling off connector on ABS sensor
4. Remove line from the bracket.
4.1. Press the line out of the bracket -arrow A-.
Removing socket from bracket
4.2. Turn the connector approx. 90° -arrow B- and take it out of the bracket -arrow C-.
5. Take the line out of the brackets -arrows-.
Removing line from brackets
6. Open the clips -arrows A- and remove the line -arrows B-.
Unclipping ABS line
7. Release the connector -arrow A- and pull it off -arrow B-.
Unplugging and removing ABS line
8. Remove wire harness.
Removing wire harness for rear ABS
Installation position of wire harness for rear ABS
Overview of wire harness for ABS
1. Release the connector -Arrow A- and pull it off -Arrow B-.
Pulling off connector on ABS sensor
2. Release the connector -Arrow A- and pull it off -Arrow B-.
Disconnecting plug connection for rear brake pad wear indicator
3. Remove line from the holder.
3.1. Press the line out of the holder -Arrow A-.
Removing socket from the holder
3.2. Turn the connector approx. 90° -Arrow B- and take it out of the holder -Arrow C-.
4. Press the line out of the holders -Arrows-.
Taking rear ABS line out of the holder
5. Removing ABS line
5.1. Press the line out of the holders -Arrow A-.
Removing rear ABS line
5.2. Release the connector -Arrow B- and pull it off -Arrow C-.
5.3. Remove the wire harness.
Installing wire harness for anti-lock brake system (ABS)
Installing wire harness for front ABS
1. Insert the line -Arrow A- until the locking lug -B- is felt to engage.
Connecting line on the main wire harness
2. Place the line in installation position and close the clips until the locking lugs are felt to engage.
Clipping in ABS line on wheel housing
3. Press the line into the holders -Arrows- until it engages securely.
Inserting ABS line into the holders
4. Insert line into the holder.
4.1. Insert the connector into the holder -Arrow A- and turn it approx. 90° -Arrow B-.
Securing connector in the holder
4.2. Press the line into the holder -Arrow C- until it is felt to engage.
5. Press the line into the holder -Arrow A- until it is felt to engage.
Connecting plug connection for front brake pad wear indicator
6. Insert the connector -Arrow B- until the locking lug -C- is felt to engage.
7. Push on connector -Arrow A- until the locking lug -B- is felt to engage.
Inserting ABS line on ABS sensor
Installing wire harness for rear ABS
1. Installing ABS line
1.1. Attach the line -Arrow A- until the locking lug -B- is felt to engage.
Installing rear ABS line
1.2. Press the line into the holder -Arrow C- until it engages securely.
2. Press the line into the holders -Arrows- until it engages securely.
Inserting rear ABS line into the holder
3. Insert line into the holder.
3.1. Insert the connector into the holder -Arrow A- and turn it approx. 90° -Arrow B-.
Securing connector in the holder
3.2. Press the line into the holder -Arrow C- until it engages securely.
4. Insert the connector -Arrow A- until the locking lug -B- is felt to engage.
Connecting plug connection for brake pad wear indicator
5. Insert the connector -Arrow A- until the locking lug -B- is felt to engage.
Connecting ABS line on ABS sensor
Subsequent work
1. Install wheel. -> 440519 Removing and installing wheel - section on "Installing" Removal and Replacement