Removing And Installing Wire Harness For Anti-Lock Brake System (ABS)

Removing And Installing Wire Harness For Anti-Lock Brake System (ABS)

Preliminary Work
1. Remove wheel.

Removing Wire Harness For Anti-lock Brake System (ABS)

Removing Front ABS Wire Harness















1. Release the socket -arrow A- and pull it off -arrow B-.
2. Take the line out of the bracket -arrow C-.







3. Release the connector -arrow A- and pull it off -arrow B-.
4. Remove line from the bracket.







4.1. Press the line out of the bracket -arrow A-.
4.2. Turn the connector approx. 90° -arrow B- and take it out of the bracket -arrow C-.







5. Take the line out of the brackets -arrows-.







6. Open the clips -arrows A- and remove the line -arrows B-.







7. Release the connector -arrow A- and pull it off -arrow B-.
8. Remove wire harness.

Removing Wire Harness For Rear ABS















1. Release the connector -Arrow A- and pull it off -Arrow B-.







2. Release the connector -Arrow A- and pull it off -Arrow B-.
3. Remove line from the holder.







3.1. Press the line out of the holder -Arrow A-.
3.2. Turn the connector approx. 90± -Arrow B- and take it out of the holder -Arrow C-.







4. Press the line out of the holders -Arrows-.
5. Removing ABS line







5.1. Press the line out of the holders -Arrow A-.
5.2. Release the connector -Arrow B- and pull it off -Arrow C-.
5.3. Remove the wire harness.

Installing Wire Harness For Anti-lock Brake System (ABS)

Installing Wire Harness For Front ABS







1. Insert the line -Arrow A- until the locking lug -B- is felt to engage.







2. Place the line in installation position and close the clips until the locking lugs are felt to engage.







3. Press the line into the holders -Arrows- until it engages securely.
4. Insert line into the holder.







4.1. Insert the connector into the holder -Arrow A- and turn it approx. 90° -Arrow B-.
4.2. Press the line into the holder -Arrow C- until it is felt to engage.







5. Press the line into the holder -Arrow A- until it is felt to engage.
6. Insert the connector -Arrow B- until the locking lug -C- is felt to engage.







7. Push on connector -Arrow A- until the locking lug -B- is felt to engage.

Installing Wire Harness For Rear ABS
1. Installing ABS line







1.1. Attach the line -Arrow A- until the locking lug -B- is felt to engage.
1.2. Press the line into the holder -Arrow C- until it engages securely.







2. Press the line into the holders -Arrows- until it engages securely.
3. Insert line into the holder.







3.1. Insert the connector into the holder -Arrow A- and turn it approx. 90° -Arrow B-.
3.2. Press the line into the holder -Arrow C- until it engages securely.







4. Insert the connector -Arrow A- until the locking lug -B- is felt to engage.







5. Insert the connector -Arrow A- until the locking lug -B- is felt to engage.

Subsequent Work
1. Install wheel.