371519 Removing and installing selector lever cable

WM 371519 Removing and installing selector lever cable

Tools






Preliminary work for selector lever cable

1. Move selector lever to position D.
2. Remove selector frame. -> 370819 Removing and installing selector frame - removing 370819 Removing and installing selector support

Removing selector lever cable

Information

- When a new selector lever cable is used, this should be connected directly to the old cable when it is removed. This ensures that it is routed correctly.

1. Remove shield on the transmission. To do this, unscrew three fastening screws -arrow-.





Shield to left of transmission

2. Remove tab washer -A- on the cable.





Selector lever cable connection to transmission

3. Unscrew selector lever cable from the ball joint with universal disassembly tool NR.21.





Removing selector lever cable on transmission

4. Pull selector lever cable up and out through the lower part of the selector frame.

Installing selector lever cable

Removing and installing cable adjustment

Information

- When a new selector support is used, the cable adjustment of the selector cable must be modified.

1. Remove pins -direction of arrow- and take out cable adjustment.





Removing the cable adjustment

2. Insert cable adjustment on the new selector support and install pins -direction of arrow-.





Installing the cable adjustment

3. When doing so, ensure that the opening for the adjusting screw -arrow- is turned upwards.





Cable adjustment

Installing selector lever cable

Information

- When a new selector lever cable is used, this should be connected to the old cable immediately during removal. This ensures that it is routed correctly.

Information

- The cable adjustment must be changed when a new selector lever cable is used.

1. Install selector lever cable through the lower part of the selector frame.
2. Press rubber sleeve on the selector lever cable into the lower part of the selector frame.

Information

- Ensure that the tab washer is seated correctly.

3. Attach tab washer -A- to the cable holder on the transmission side.





Selector lever cable connection to transmission

4. Attach cable to the ball joint -arrow-.





Selector lever cable connection to transmission

5. Install shield on the transmission. To do this, screw in three fastening screws -arrow-.





Shield to left of transmission

Subsequent work for selector lever cable

Reworking selector lever cable

1. Install selector frame. -> 370819 Removing and installing selector frame - installing 370819 Removing and installing selector support