397719 Removing and Installing Transverse Lock Servo Motor

WM 397719 Removing and installing transverse lock servo motor

Technical values






Removing transverse lock servo motor





Overview of transverse lock servo motor

1. Pull cable plug -1, 2- off the servo motor.





Electric plug on servo motor

2. Pull off fastening element -arrow- for cable lead and place lead aside.





Cable lead fastening

3. Unscrew four fastening screws -arrows- on the servo motor.





Servo motor fastening

CAUTION

Emerging oil is harmful to the eyes.

-> Wear personal protective gear (e.g. safety goggles).

Information

- Avoid minor oil leaks when removing the servo motor.

4. Place oil collection container underneath.
5. Remove servo motor.

Installing transverse lock servo motor





Overview of transverse lock servo motor

1. Replace sealing ring -arrow- on servo motor.





Sealing ring on servo motor

2. Install servo motor.
3. Screw in four screws -arrows- on servo motor. => Tightening torque: 7.5 ftlb.





Servo motor fastening

4. Install fastening element -arrow- for cable lead.





Cable lead fastening

5. Connect cable plug -1, 2- to servo motor.





Electric plug on servo motor

Subsequent work

Subsequent work for servo motor for differential lock

1. Check the oil in the final drive. => 399035 Checking and topping up oil for rear final drive