667919 Removing and installing housing for rear-view mirror

WM 667919 Removing and installing housing for rear-view mirror

Preliminary work

1. Remove mirror adjusting motor. -> 66821900 Removing and installing mirror adjusting motor - section on "Removing" Service and Repair

Removing housing for rear-view mirror

1. Unscrew fastening screws -1- and remove the plate -2-.





Removing plate

2. Unscrew fastening screws -1- and remove mirror housing -2- in direction of arrow.





Removing mirror housing

3. Unscrew fastening screw -1- from below and remove cover -2- in direction of arrow.





Removing cover

Installing housing for rear-view mirror

1. Insert wire harness -3- into the cover -2- and slide cover into the mirror base.





Installing cover

2. Screw in fastening screw -1- from below.
3. Slide mirror housing -2- into the mirror base until it engages audibly with the cover.





Installing housing

4. Screw in fastening screws -1-.
5. Position plate -2- on the mirror base and secure with the fastening screws -1-.





Installing plate

Subsequent work

1. Install mirror adjusting motor. -> 66821900 Removing and installing mirror adjusting motor - section on "Installing" Service and Repair