System Specifications
Cylinder head heightStandard dimension -X- 142.0 ± 0.05 mm
Permissible unevenness
Permissible unevenness of parting surface for used cylinder head 0.05 mm
Permissible unevenness after machining 0.03 mm
Permissible roughness profile (can be measured with contact stylus procedure) 15pt14
Permissible surface depth from standard dimension 0.15 ± 0.05 mm
Bore
Bore 96 mm
Crankshaft axial play
Gear Carrier
Initial tightening 15 Nm (11 ftlb.)
Torque angle 120°
Connecting rod bolt
Piston
Belt Pulley
Initial tightening
Tightening torque 37 ftlb.
Final tightening
Torque angle 90°