644819 Removing and installing front window shaft seal

WM 644819 Removing and installing front window shaft seal

Removing front window shaft seal





Installation position of front window bay seal

1. Open the front door window -1- fully.





Opening the front door window

2. Pull front window bay seal -1- - beginning at the rear end -Arrow A- - off the sheetmetal door flange -2- in an upward direction -Arrow B-.





Removing the front window bay seal

3. Remove the front window bay seal -1-.

Installing front window shaft seal





Installation position of front window shaft seal

NOTICE

Dirty door window glass installed

- Risk of irreparable damage to front window channel seal

-> During installation, make sure that no lubricant from the window guides gets on to the door window glass.
-> Clean the door window glass and check that the front window channel seal is clean.
-> Replace damaged window channel seal.

Information

- Make sure horizontal alignment is correct (Arrows C, D).

1. Attach front window shaft seal -1- - starting at the front end -Arrow A- - to the sheetmetal door flange -2- from above -Arrow B-.





Installing the front window shaft seal

2. Close the front door window -1- fully.





Closing the front door window