Removing and Refitting Transmission

WM 343527 Removing and refitting transmission





Preliminary work

Preliminary work
1. Remove engine-transmission unit.

Removing transmission

Removing transmission
1. Unclip coolant lines from the holders.





2. Remove cable duct. To do this, undo the screws and move the cable duct towards the engine.





3. Attach transmission to workshop crane.
4. Unscrew eight connecting bolts between the engine and transmission and pull out the transmission to the rear.

Refitting transmission

Refitting transmission
1. Attach transmission to workshop crane.
2. Refit transmission and screw in connecting bolts.








3. Fit cable duct.








4. Engage coolant lines in holder.





Subsequent work

Subsequent work
1. Install engine-transmission unit.