Removing and Installing Sealing Ring For Right Halfshaft Flange
Removing and installing sealing ring for right halfshaft flange
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove the underbody panel.
3. Remove right halfshaft flange.
Removing sealing ring for right halfshaft flange
Removing sealing ring for halfshaft flange
1. Lever the sealing ring out of the transmission.
Levering out the sealing ring
Installing sealing ring for right halfshaft flange
Installing sealing ring for halfshaft flange
1. Screw M10 x 30 hexagon-head bolt into side A of Pressure piece 9734.
Screw in special tool
2. Thinly coat sealing lip and outer circumference of sealing ring with Vaseline and place the sealing ring on side B of pressure piece 9734.
Sealing ring on special tool
3. Hammer the sealing ring along with pressure piece 9734 completely into the transmission by hitting the hexagon-head bolt.
Tapping in sealing ring
Subsequent work
1. Install the right halfshaft flange.
2. Check transmission oil level.
3. Fit the underbody panel.
4. Lower the vehicle.