P0016 Diagnosis Information - DME (DFI)

P0016

Diagnosis Information - DME (DFI)

Position of crankshaft with respect to intake camshaft, bank 1

NOTE:
- The fault is detected if the specified adaptation range is left (> 13° crank angle).

Diagnostic conditions
- Battery positive voltage between 9 V and 16 V
- Time after engine starts > 10 seconds

Possible fault causes
- Chain extended
- Camshaft timing gear undone/loose
- Wrong camshaft installed e.g. 3.6 l vs 3.8 l)