Hood: Adjustments

Adjusting Front Lid

Tools







Technical values







Adjusting front lid

Adjusting lid in X and Y direction







INFORMATION: Use star gauges to set and measure the gap dimensions. Star gauges for body gap dimensions NR.127-1.

1. Check gap dimensions on body. Refer to Diagram - body gap dimensions







2. Undo fastening screw -1- on both sides on front cover -2-.

Adjusting lid in Z direction







1. Undo fastening screws -1- on both front lid hinges -2-.







Adjusting front lid







1. By moving the front lid -2- at the hinges -2-, adjust the contours according to the wings, main headlights and front spoiler. Refer to Diagram - body gap dimensions







2. Tighten fastening screws -1-. Tightening torque: 9.7 Nm (ftlb.) (7.2)
3. Tighten fastening screws -1-. Tightening torque: 9.7 Nm (ftlb.) (7.2)