Removing and Installing Inner Door Sill Trim

Removing And Installing Inner Door Sill Trim

Technical values







Removing inner door sill trim

Removing inner door sill trim (driver's side)







1. Remove plastic caps -1- and loosen the fastening screws -2- of scuff plate -3-.







2. Lift scuff plate -1- with a plastic wedge and pull up and off.







3. Check fixing clips -2- on the underside of the scuff plate -1-, replacing if necessary.
4. Release plug connection for actuating switch and remove scuff plate.







Removing inner door sill trim (passenger's side)







1. Remove lining mat from oddments tray.







2. Unscrew fastening screw -1- from scuff plate -2-.







3. Lift scuff plate with a plastic wedge, pull off and remove.
4. Check fixing clips -3- on the underside of the scuff plate, replacing if necessary.

Installing inner door sill trim

Installing inner door sill trim (driver's side)







1. Lock plug connection for actuating switch.







2. Check fixing clips -2- on the underside of the scuff plate -1-, replacing if necessary.







3. Position scuff plate -1-, press in and engage.
4. Tighten fastening screws -2-. Tightening torque: 5 Nm (3.5 ft lb.)±0.5 Nm (±0.5 ftlb.)







5. Seal bores of scuff plate -3- with plastic caps -1-.

Installing inner door sill trim (passenger's side)







1. Check fixing clips -3- on the underside of the scuff plate -2-, replacing if necessary.
2. Position scuff plate -2-, press in and engage.







3. Tighten fastening screw -1-. Tightening torque: 2.5 Nm (2.0 ftlb.)+±0.5 Nm±0.5 ftlb.)
4. Insert lining mat in oddments tray