Removing and Installing Rear Backrest

Removing And Installing Rear Backrest

Technical values







Preliminary work

Remove back seat cushion. Refer to Removing and installing back seat cushion.

Removing rear backrest

1. Press out cover -1- with a screwdriver.







2. Unscrew fastening screw -2-.
3. Press cover -1- out to the front.







4. Unscrew fastening screw -2-.
5. Release backrest -1-, lift it out of the mounting saddle -2- (-arrow A-) and then pull it out of the bearing axle -3- (-arrow B-).







Installing rear backrest

1. Insert backrest -1- into the bearing axle -3- (-arrow A-) and engage in the mounting saddle -2- (-arrow B-).







2. Secure bearing axle -3- with the fastening screw -2-. Tightening torque: 5.6 Nm (4 ftlb.)







3. Press in cover -1-.
4. Lock backrest, align it and screw in fastening screw -2- on the outer bearing -3-. Tightening torque: 25 Nm (19 ftlb.)







5. Press in cover -1-.

Subsequent work

Install back seat cushion. Refer to Removing and installing back seat cushion.