Exhaust Pipe: Service and Repair

Removing And Installing Tailpipe Cover

Technical values







Removing tailpipe cover







1. Unscrew M10 fastening screw.

Installing tailpipe cover

1. Coat the sliding base of the tailpipe cover lightly with high-temperature grease.
2. Slide the cover onto the flange on the rear silencer.







3. Align the cover with respect to the rear apron following the specifications in the table below.







4. Fit and tighten M10 fastening screw -Arrow-. Tightening torque: 30 Nm (22 ftlb.)