Tail Light Bulb: Service and Repair

Removing And Installing Bulb For Rear Light

Preliminary work
1. Remove rear light.

Removing bulb for rear light















1. Open the bulb holders with the bayonet lock -Arrow A- and take them out of the rear light -Arrow B-.







2. Press the bulbs into the bulb holders -Arrow A-, turn them anti-clockwise -Arrow B- and take them out of the bulb holders -Arrow C-.

Installing bulb for rear light

INFORMATION: All three bulbs are two-filament bulbs with offset locking pins. Always insert the bulb at the correct position in the bulb holder.







1. Press the bulbs into the bulb holder -Arrow A- and turn them -Arrow B- until the bulbs engage securely in the bulb holders.







2. Insert the bulb holders with the bulbs into the rear light -Arrow A- and lock them -Arrow B-.

Subsequent work
Install rear light.