Antenna Control Module: Service and Repair

Removing And Installing Control Unit For Antenna

Preliminary work

Preliminary work - antenna control unit
Remove right-hand panel of centre console.

Removing control unit for antenna

Removing antenna control unit







1. Remove ignition key and switch off audio system.







2. Undo the velcro strip on the carpet underneath the centre console.







3. Push a screwdriver under the control unit and lever it up at the front and rear.







4. Release the electrical connectors -A- and pull them away from the antenna control unit.
5. Take out the control unit.

Installing control module for antenna

Installing antenna control unit







1. Press electrical connectors onto control module until they are felt to engage.







2. Position control unit on body and secure it with retaining clips.
3. Draw the carpeting beneath the centre console together and secure with the velcro fastener.

Subsequent work

Subsequent work - antenna control unit
Install right-hand panel of centre console.