Removing and Installing Rear Three-Point Belt

Removing And Installing Rear Three-Point Belt

Technical values







Preliminary work

1. Remove C-pillar trim. Refer to Removing and installing C-pillar trim.

Removing rear three-point belt







1. Unscrew fastening screw -1- from the deflector -2-.







2. Unscrew fastening screw -3- from the automatic belt device -4- and remove automatic belt device -4-.

Installing rear three-point belt







INFORMATION: Ensure that belt strap can run properly.

1. Position automatic belt device -4-, making sure that the locking tab of the automatic belt device is engaged correctly in the sheetmetal bracket.







2. Secure automatic belt device -4- with the fastening screw -3-. Tightening torque: 37 ftlb.±3.5 ftlb.

INFORMATION: Ensure that belt strap can run properly.

3. Position deflector -2- and screw down with the fastening screw -1-. Tightening torque: 37 ftlb.±3.5 ftlb.

Subsequent work

1. Install C-pillar trim. Refer to Removing and installing C-pillar trim.