Evaporator Temperature Sensor / Switch: Service and Repair

Removing And Installing Temperature Sensor For Evaporator

Preliminary work

Preliminary work for temperature sensor for evaporator
Remove right trim panel under the dashboard.

Removing temperature sensor for evaporator












1. Slide your hand up between the heater/air-conditioning unit -A- and bulkhead -B- and feel for the temperature sensor.
2. Turn the temperature sensor 90° to the left (in direction of travel).
3. Pull the temperature sensor forward (in direction of travel) out of the heater/air-conditioning unit and then pull it down.







4. Release the electric plug connection -a- and disconnect it.

Installing temperature sensor for evaporator

1. Plug in electric connector on the temperature sensor until the connector engages securely.







2. Guide the temperature sensor up between the bulkhead -B- and heater/air-conditioning unit -A-.
3. Slide the temperature sensor into the heater/air-conditioning unit and turn it 90° to the right.
4. Check that the temperature sensor is seated securely in the heater/air conditioning unit.

Subsequent work

Subsequent work for temperature sensor for evaporator
Install right trim panel under the dashboard.