Removal and Replacement

Removing and installing guide sleeve





Information





Clutch control - GT3

1 - Snap ring

2 - Thrust washer

3 - Release bearing

4 - Spring washer

5 - Spacer

6 - Pressure plate

7 - Guide sleeve

Preliminary work

1. Remove transmission
2. Remove release bearing.

Removing guide sleeve

1. Remove guide sleeve.

Unscrew fastening screws for the guide sleeve -Arrows- and pull the guide sleeve off.





Guide sleeve

Installing guide sleeve





Guide sleeve

1. Fit guide sleeve.

Apply a thin coat of Kluberalfa HM83-801 on the guide sleeve.





2. Grease the splines of the transmission input shaft.

Use Longtime 3EP grease.

Subsequent work

1. Install release bearing.
2. Refit the transmission.