Removing and Installing Right Halfshaft Flange

Removing and installing right halfshaft flange





Preliminary work

1. Remove drive shaft on transmission.

Removing right halfshaft flange

Information





Removing drive shaft flange

The halfshaft flange screw is coated with securing liquid. Always loosen and unscrew the screw only by hand. Loosening the screw using a commercially available electric screwdriver can cause the shaft bevel gear and threaded disc to move inwards out of the splines, rendering the screw ineffective. The differential lock would then have to be disassembled. Avoid this at all costs!

1. Loosen screw -1- and remove it.





Halfshaft flange

2. Remove halfshaft flange -2-.

Installing right halfshaft flange





Halfshaft flange

1. Install halfshaft flange.

Information
Always replace screw for the halfshaft flange.

Insert halfshaft flange -2- and screw in and tighten screw -1-.

-> Tightening torque: 44 Nm (33 ftlb.)

Subsequent work

1. Refit drive shaft on transmission.