Wiper Motor Linkage: Service and Repair

Removing And Installing Wiper Link

Technical values







Preliminary work

Preliminary work on wiper motor
Disconnect the battery and cover terminal or battery.

Left plenum chamber cover.

Preliminary work for wiper link
Remove wiper arms.

Removing cowl panel cover.

Disconnect the battery.

Removing wiper link

Removing wiper linkage







1. Unscrew the three fastening screws -3- for the wiper linkage and release and unplug the electric connector for the wiper motor.
2. Remove wiper linkage. If the wiper motor must be removed from the wiper linkage, then proceed according to "Removing and installing wiper motor"

Installing wiper link

Installing wiper linkage
1. If necessary, fit the wiper motor to the wiper linkage.







2. Position wiper linkage in the radiator tank and screw down the fastening screws -3A, 3B, 3,C- in turn. - Tightening torque: 10 Nm (7.5 ftlb.)

Subsequent work

Reworking wiper link
Left plenum chamber cover.

Connect battery.