Convertible Top Deck Lid Seal: Service and Repair

Removing And Installing Seal For Convertible-Top Compartment Lid

Removing seal for convertible-top compartment lid

1. Move convertible top to position shown in the illustration.







2. Pull seal for convertible-top compartment lid off the flanges at the side panels -Arrows A- and at the corner pieces -Arrows B-, as well as off the flanges connecting to the engine compartment bulkhead -Arrows C-.







Removing seal for convertible-top compartment lid

Installing seal for convertible-top compartment lid

INFORMATION:
- Before replacing, check the existing seal for signs of damage (areas torn, crushed, etc.). If there are signs of damage, the seal must be replaced.
- The seal is pressed onto the flange without any additional sealants.

1. Lay seal for convertible-top compartment lid evenly along the flange. Position and press the seal without tension onto the flanges at the side panels -Arrows A-, at the corner pieces -Arrows B- and onto the flanges connecting to the engine compartment bulkhead -Arrows C-.







INFORMATION: Pay particular attention to the areas near the tight roundings for correct installation; there must be no deformation or stretching.

2. Close convertible top.