Tire Pressure Monitor Antenna: Service and Repair

Removing and installing antenna for tire pressure monitoring system





Preliminary work

1. Remove front wheel housing liner (Part A).
2. Remove rear wheel housing liner (Part A).

Removing antenna for tire pressure monitoring system

Removing antenna of front tire pressure monitoring system





Overview of tire pressure monitoring system

1. Switch off ignition and remove ignition key.
2. Unscrew fastening screw -1-.





Unscrewing fastening screw for antenna of front tire pressure monitoring system

3. Pull out -Arrow A- and remove antenna of tire pressure monitoring system from holder.
4. Release -Arrow a- and pull off plug and remove antenna of tire pressure monitoring system.





Pulling plug from antenna of tire pressure monitoring system

Removing antenna of rear tire pressure monitoring system





Overview of antennas of tire pressure monitoring system

1. Switch off ignition and remove ignition key.
2. Unscrew the two fastening nuts -1- and remove antenna of tire pressure monitoring system.





Unscrewing fastening screw for antenna of rear tire pressure monitoring system

3. Release -Arrow a- and pull off plug and remove antenna of tire pressure monitoring system.





Pulling plug from antenna of tire pressure monitoring system

Installing antenna for tire pressure monitoring system

Installing antenna of front tire pressure monitoring system

1. Insert plug until it is felt to engage.





Pushing plug onto antenna of tire pressure monitoring system

2. Insert antenna of tire pressure monitoring system into holder -Arrow A- and secure with fastening screw -1-. - Tightening torque: 1.5 ftlb.





Securing antenna of tire pressure monitoring system with fastening screw

Installing antenna of rear tire pressure monitoring system

Information
When replacing antenna of rear tire pressure monitoring system, the holder must also be replaced.

1. Clip new holder -1- in antenna of tire pressure monitoring system until it is felt to engage in the locking tab -arrows-.





Clipping new holder in antenna of tire pressure monitoring system

2. Insert plug until it is felt to engage.





Pushing plug onto antenna of tire pressure monitoring system

3. Position antenna of tire pressure monitoring system and secure with both fastening nuts -1-. - Tightening torque: 1.5 ftlb.





Securing antenna of tire pressure monitoring system with fastening screws

Subsequent work

1. Install front wheel housing liner (Part A).
2. Install rear wheel housing liner (Part A).