Removal and Replacement

Removing and installing guide sleeve

Information





Clutch control - GT3

1 - Snap ring
2 - Thrust washer
3 - Release bearing
4 - Spring washer
5 - Spacer
6 - Pressure plate
7 - Guide sleeve

Preliminary work

1. Remove transmission.
2. Remove release bearing.

Removing guide sleeve

1. Remove guide sleeve.

Unscrew fastening screws for the guide sleeve -Arrows- and pull the guide sleeve off.





Guide sleeve

Installing guide sleeve





Guide sleeve

1. Fit guide sleeve.

Apply a thin coat of Kluberalfa HM83-801 on the guide sleeve.





2. Grease the splines of the transmission input shaft.

Use Longtime 3EP grease.

Subsequent work

1. Install release bearing.
2. Refit the transmission.