Removing and Installing Sealing Ring For Left Halfshaft Flange

Removing and installing sealing ring for left halfshaft flange








Preliminary work

1. Remove drive shaft on transmission.

Removing sealing ring for left halfshaft flange

Information
The halfshaft flange screw is coated with securing liquid. Always loosen and unscrew the screw only by hand. Loosening the screw using a commercially available electric screwdriver can cause the shaft bevel gear and threaded disc to move inwards out of the splines, rendering the screw ineffective. The differential lock would then have to be disassembled. Avoid this at all costs!





Removing drive shaft flange





Halfshaft flange

1. Loosen screw -1- and remove it.
2. Remove halfshaft flange -2-.
3. Lever the sealing ring out of the transmission.





Levering out sealing ring

Installing sealing ring for left halfshaft flange

1. Fit sealing ring.

1.1. Thinly coat the outer circumference and sealing lip of the sealing ring with Vaseline and place sealing ring on the pressure piece 9252.





Tapping in sealing ring

1.2. Tap sealing ring in as far as the mounting face.





Halfshaft flange

2. Install halfshaft flange.

Information
Always replace screw for the halfshaft flange.

Insert halfshaft flange -2- and screw in and tighten screw -1-.

- Tightening torque: 44 Nm (33 ftlb.)

Subsequent work

1. Refit drive shaft on transmission.
2. Check transmission oil and top up if necessary.