Trailer Hitch Control Switch: Service and Repair
WM 666219 Removing and installing switch for trailer hitch
Preliminary work
Pull out fuse F 19 from fuse carrier at right of dashboard. -> 97 Circuit diagram for '03 model Cayenne (9PA)
Removing switch for trailer hitch
Overview of switch for trailer hitch
1. Lever switch out of trim panel using a standard screwdriver -arrow A- and remove it -arrow B-.
Levering out switch
2. Pull switch off the connector -arrow-.
Pulling switch off connector
Installing switch for trailer hitch
1. Push switch onto the connector -arrow A- until the locking tabs -arrows B- are felt to engage.
Pushing switch onto connector
2. Position the switch parallel to the trim panel and -arrow A- until the locking tabs -arrows B- are felt to engage.
Subsequent work
Insert fuse F 19 in fuse carrier at right of dashboard. -> 97 Circuit diagram for '03 model Cayenne (9PA)