Removing and Installing Side Direction Indicator Light

Removing and installing side direction indicator light

Preliminary work
1. Release wheel housing liner in the front area.

Installing side direction indicator light

INFORMATION:
If the lamp bracket is "twisted" in the lamp housing, this can damage the light and/or cause the side direction indicator light to fog up.
- When fitting the bulb socket, make sure that the bulb socket guide is inserted into the groove on the direction indicator light and check that the rubber sleeve is flush with the direction indicator light.

1. Install side direction indicator light.
1.1. Insert side direction indicator light -2- from the rear in -direction of arrow- into the front apron until the clip -arrow- engages securely.







1.2. Tighten fastening screws -1-.







2. Push bulb socket -1- onto the direction indicator light -2- ( -arrow- ).

Subsequent work
1. Secure wheel housing liner in the front area.