Removing and Installing Sealing Ring For Output Flange

Removing and installing sealing ring for output flange





Preliminary work for sealing ring for output flange
1. Remove rear final drive.

Removing sealing ring for output flange





Overview of sealing rings

1. Remove output flange with special tool striker vw 771/1 and shop-made tool.





Removing output flange

2. Remove sealing ring with special tool striker vw 771/1 extraction tool vw 771/37.





Removing sealing ring

Installing sealing ring for output flange





Overview of sealing rings

1. Replace circlip on flange shaft.





Replacing circlip

2. Drive in new sealing ring with special tool pressure piece t10181 until the special tool touches the transmission housing.





Installing sealing ring

3. Install output flange.