660719 Removing and installing front logo

WM 660719 Removing and installing front logo

Preliminary work

1. Remove front apron
1.1. => 631519 Removing and installing front apron - section on "Removing"

Removing logo





Installation position of logo

1. Remove logo.
1.1. Release locking lugs on logo on the inside of the front apron -arrows A-.
1.2. Remove logo from outside of the front apron -arrow B-.





Removing logo

2. Slide holder for logo to the left -arrows- and remove from the front apron in a downward direction.





Removing holder for logo

Installing logo





Installation position of logo

1. Fit holder for logo into the front apron from the rear and slide it to the right -arrows-.





Installing holder for logo

2. Press logo into the front apron -arrow A- until the locking lugs engage securely -arrows B-.





Installing logo

Subsequent work

1. Installing front apron
1.1. => 631519 Removing and installing front apron - section on "Installing"