743019 Removing and installing heating element for rear seat

WM 743019 Removing and installing heating element for rear seat

Preliminary work

Remove cover for rear seat -> 745019 Removing and installing cover for rear seat - section on "Removing" Service and Repair

Removing heating element for rear seat

Information

- The side bolster heating elements -1- are connected by an electrical lead and can only be replaced together.





Allocation of heating elements

- The heating element is sewn into the cover in the area of the seat cushion -2- and can only be replaced together with the cover.

- Remove the heating elements with care, otherwise the padding will be damaged.

- If necessary, carefully warm the heating elements with a hot-air gun. The temperature must not exceed 50°C.





Overview of heating element for rear seat

1. Carefully remove the heating elements starting from the front -arrows-.





Removing heating elements

Installing heating element for rear seat

Information

- Stick on the heating elements individually.

1. Align heating element to contour of padding.
2. Remove protective film and, starting from the rear edge, stick heating element -Arrows A- onto the padding -Arrows B-.





Installing heating elements

3. Position the line in the padding -arrows-.





Positioning the line

Subsequent work

Install cover for rear seat -> 745019 Removing and installing cover for rear seat - section on "Installing" Service and Repair